Finding:

1. close

   Furnace anneal

   Furnace annealing is a process used in semiconductor device fabrication which consist of heating multiple semiconductor wafers in order to affect their electrical properties.
2. close

   Semiconductor device fabrication

   These doping processes are followed by furnace anneal or in advanced devices, by rapid thermal anneal (RTA) which serve to activate the implanted dopants. ... Furnace anneals
3. close

   Heat treatment

   When an annealed part is allowed to cool in the furnace, it is called a "full anneal" heat treatment. When an annealed part is removed from the furnace and allowed to cool in air, it is called a "normalizing" heat treatment.
4. close

   McLouth Steel

   The cold anneal and pickle line was installed in 1975 by Production Machinery. ... This facility has a four stand continuous cold rolling strip mill, annealing furnaces, two skin pass finishing mills and other ancillary equipment for further processing of cold rolled steel coils.
5. close

   Rapid thermal processing

   Rapid thermal anneal (RTA) is a subset of Rapid Thermal Processing. ... Unlike furnace anneals they are short in duration, processing each wafer in several minutes.
6. close

   Early modern glass in England

   The early modern period in England (c. 1500-1800) brought on a revival in local glass production. ... At Bagot's Park, Staffordshire, one such glasshouse has been recovered, which dates from circa 1535; it contained an early melting furnace and a smaller annealing furnace.
7. close

   Glass production

   The batch house handles the raw materials; the hot end handles the manufacture proper — the furnaces, annealing ovens, and forming machines; and the cold end handles the product-inspection and -packaging equipment. ... Furnace
8. close

   Annealing (metallurgy)

   A full anneal typically results in the second most ductile state a metal can assume for metal alloy. ... In other cases the material is allowed to furnace cool.
9. close

   Tinplate

   Tinplate consists of sheets of steel, coated with a thin layer of tin. ... After inspection they were placed in an annealing furnace, where they were heated for 10–14 hours.
10. close

    Restricted randomization

    Many processes have more than one source of variation in them. ... The anneal furnace can handle up to 100 wafers.

Explore the following pages on Powerset:

• Furnace anneal,
• Semiconductor device fabrication,
• Heat treatment,
• McLouth Steel,
• Rapid thermal processing,
• Early modern glass in England,
• Glass production,
• Annealing (metallurgy),
• Tinplate,
• Restricted randomization

Try this on Bing Research

Bing